Filter
Top Products
Communications Settings
10-9
System Manager Settings
10
9
Select [On] or [Off] for <Always send notice for RX errors>.
[On]: If an error occurs, the sender is always informed of the details of the
error.
[Off]: If an error occurs, the sender is not informed of the details of the error.
10
Select [On] or [Off] for <Use Send Via Server> ➞ press [OK].
[On]: Enables you to set whether to use the Send Via Server setting as a
condition to send to I-Fax addresses.
[Off]: Disables you to set whether to use the Send Via Server setting as a
condition to send to I-Fax addresses.
The selected mode is set.
11
Press [Done] repeatedly until the Send Basic Features screen
appears.