Filter
Top Products
Gamma Value for Color Send Jobs
8-33
Customizing Communications Settings
8
Gamma Value for Color Send Jobs
You can set the Gamma value for color scanned data. If the set value corresponds
to the Gamma value at the receiving end, the scanning exposure of the output data
at the receiving end is automatically adjusted to the level best suited to the quality
of the original. Gamma values are expressed as input-output characteristics.
Output is darkened as the gamma value is increased, and is lightened as the
gamma value is decreased. If the density of images received at the destination is
excessively light or dark, the gamma value can be changed before resending the
images.
NOTE
•
If the optional Super G3 FAX Board is installed, and you are sending documents by fax,
this setting is disabled.
•
The default setting is 'Gamma 1.8'.
1
Press (Additional Functions) ➞ [Communications
Settings] ➞ [TX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Automatic Document
Deletion," on p. 8-4.
2
Press [▼] or [▲] until [Gamma Value for Color Send Jobs]
appears ➞ press [Gamma Value for Color Send Jobs].