Filter
Top Products
Scan Settings
3-23
Basic Scanning Features
3
3
Press [A] ➞ [OK].
The scanning exposure is automatically adjusted to the level best suited to the
quality of the original.
The selected mode is set, and the display returns to the Send Basic Features
screen.
NOTE
Automatic exposure may not work with transparencies. If this happens, adjust the
exposure manually by pressing [ ] or [ ].
4
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When
scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
To cancel the scan settings, press the Scan Settings drop-down list ➞ press
[Option] ➞ [Cancel].
•
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).