Filter
Top Products
Placing Originals
1-41
Introduction to Sending Functions
1
2
Neatly place your originals with the side to be scanned face
up in the original supply tray.
Place your originals as far into the feeder as they will go, until the Original Set
indicator is lit.
IMPORTANT
•
Do not add or remove originals while they are being scanned.
•
When scanning is complete, remove the originals from the original output area to
avoid paper jams.
NOTE
•
When you are enlarging LTR originals to 11" x 17" or LGL paper, place your
originals horizontally.
•
The scanned originals are output to the original output area in the order they are
fed into the feeder.
•
You can place different size originals together in the feeder if you set the Different
Size Originals mode. However, the length (vertical direction) of the different paper
sizes must be the same. For example, 11" x 17" and LTR paper can be placed
together. (See "Different Size Originals," on p. 4-17.)
Original Set Indicator
Original Output Area