Filter
Top Products
Job Recall
5-42
Sending Documents
5
2
Select [1 Before], [2 Before], or [3 Before] ➞ confirm the
settings ➞ press [OK].
The display returns to the Send Basic Features screen.
NOTE
•
You can also check which send jobs are stored in memory other than the currently
displayed send job by pressing [
▼
] or [
▲
].
•
You can change the settings in a recalled send job.
•
If there are multiple destinations stored in Recall memory, the order of the
destinations shown in the list may not correspond to the order of their settings.
3
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When
scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)