Filter
Top Products
Forwarding Settings
10-32
System Manager Settings
10
● If the optional Super G3 FAX Board is installed, and [Fax] is selected
as the receive type:
❑ Select the Fax Number, Subaddress, or Password drop-down list.
The available forwarding conditions are:
[disregarded]: Disregards the Fax Number information as a forwarding
condition.
[does not exist]: The Subaddress or Password information does not exist.
[equals]: Forwards the document if the Fax Number, Subaddress,
or Password information matches all of the characters
entered.
[differs from]: Forwards the document if the Fax Number information
differs from the characters entered.
[begins with]: Forwards the document if the Fax Number information
begins with the characters entered.
[ends with]: Forwards the document if the Fax Number information
ends with the characters entered.
[contains]: Forwards the document if the Fax Number information
contains the characters entered.
[does not contain]: Forwards the document if the Fax Number information
does not contain the characters entered.
[does not exist] is not an option for <Fax Number>.
[does not exist] and [equals] are the only forwarding conditions that can be
selected for <Subaddress> and <Password>.
You cannot set the following combinations of conditions.
Fax Number Subaddress Password
[disregarded] [does not exist] [equals]
Other than [disregarded] [equals] [equals]
Other than [disregarded] [does not exist] [equals]
Other than [disregarded] [equals] [does not exist]