Filter
Top Products
Storing New Addresses
9-19
Storing/Editing Address Book Settings
9
File Server Addresses
NOTE
•
For examples of the settings needed to send to a file server, see the Network Guide.
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
•
You can enter up to 24 characters for the file server name.
•
You can enter up to 128 characters for the host name and file path.
•
You can input the user name as follows:
- If FTP is selected:
Up to 24 characters
- If Windows (SMB) is selected:
When inputting the user name: Up to 20 characters
When inputting domain name\user name: Domain name: Up to 15 characters, User
name: Up to 20 characters
When inputting for UPN: Up to 128 characters
- If NetWare (IPX) is selected:
Up to 24 characters
•
UPN (User Principal Name) can be used only if you are sending to a computer belonging
to a domain operated with Active Directory.
•
Up to 24 characters (14 characters when Windows (SMB) is selected) can be entered for
the password.
1
Press (Additional Functions) ➞ [Address Book Settings] ➞
[Register Address].
If necessary, see the screen shots in steps 1 and 2 of "E-Mail Addresses," on
p. 9-5.
If a password has been set for the Address Book, enter the password using
- (numeric keys) ➞ press [OK]. (See "Address Book Password," on
p. 10-22.)