Filter
Top Products
Specifying Destinations
2-22
Basic Sending Methods
2
3
Press [Browse].
IMPORTANT
After turning the main power ON, you must wait for the time set in Startup Time
Settings to elapse before pressing [Browse]. Network transmission is not possible
until this startup time has elapsed. To access Startup Time Settings, press
(Additional Functions) ➞ [System Settings] ➞ [Network Settings] ➞ [▼]. (See
Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
4
Select the desired workgroup ➞ press [Down].
If the desired workgroup is not displayed, press [▼] or [▲] to scroll to the desired
workgroup.