Filter
Top Products
2 On 1 Log
8-48
Customizing Communications Settings
8
2 On 1 Log
This mode enables you to print two received documents of the same paper size
onto a single sheet of paper.
The 2 On 1 Log mode is available only under the following conditions:
• The same paper drawer must be selected for printing two consecutive pages of
the received document.
• The paper in the selected paper drawer must be large enough for two consecutive
pages to be printed out.
- Example: If the LTR drawer is empty, but the 11" x 17" drawer is loaded with
paper, you can print two LTR documents onto a single sheet of 11" x 17" paper.
NOTE
•
When the 2 On 1 Log mode is set to 'On', documents are printed with a broken line in the
middle. If the document is received with sender information included, the dotted line is
not printed on the area where the sender information is located.
•
The default setting is 'Off'.
1
Press (Additional Functions) ➞ [Communications
Settings] ➞ [RX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Two-Sided Printing," on
p. 8-37.
2
Press [2 On 1 Log].