Filter
Top Products
Sending Methods
5-13
Sending Documents
5
NOTE
•
In order to view a JPEG file, a software application that supports the JPEG file
format is required.
•
In order to view a TIFF or MTIFF file, a software application that supports TIFF or
MTIFF file formats (such as Imaging for Windows) is required.
•
In order to view a PDF file, Adobe Acrobat Reader is required.
•
For more information on the different file formats, see "File Formats," in the
Glossary, on p. 13-12.
•
If [PDF (Compct)] is selected as the File Format, set JPEG Compression Ratio in
TX Settings under <Common Settings> in Communications Settings (from the
Additional Functions screen) to 'Normal' or 'Low Ratio'. If the JPEG Compression
Ratio is set to 'High Ratio', the image output may be of a low quality even if [Image
Priority] is selected in Image Level for PDF (Compct) in TX Settings under
<Common Settings> in Communications Settings (from the Additional Functions
screen). (See "JPEG Compression Ratio for Color Send Jobs," on p. 8-6.)
15
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When
scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your document. (See
"Previewing Originals," on p. 5-34.)