Filter
Top Products
108 Advanced iDRAC6 Configuration
Configuring Terminal Mode
1
Expand the
System
tree and click
Remote Access
.
2
Click the
Network/Security
tab and then click
Serial
.
3
In the
Serial
page, click
Terminal Mode Settings
.
4
Configure the terminal mode settings.
See Table 5-11 for description of the terminal mode settings.
5
Click
Apply Changes
.
6
Click the appropriate
Terminal Mode Settings
page button to continue.
See Table 5-12 for description of the terminal mode settings page buttons.
Table 5-11. Terminal Mode Settings
Setting Description
Line Editing Enables or disables line editing.
Delete Control Select one of the following:
•
iDRAC outputs a <bksp><sp><bksp> character
when <bksp> or <del> is received
—
•
iDRAC outputs a <del> character when <bksp> or
<del> is received
—
Echo Control Enables or disables echo.
Handshaking Control Enables or disables handshaking.
New Line Sequence Select None, <CR-LF>, <NULL>, <CR>, <LF-CR>,
or <LF>.
Input New Line
Sequence
Select <CR> or <NULL>.
Table 5-12. Terminal Mode Settings Page Buttons
Button Description
Print Print the Terminal Mode Settings page.
Refresh Refresh the Terminal Mode Settings page.