Filter
Top Products
Configuring the iDRAC6 Using the Web Interface 63
f
Ensure that the serial MUX is set correctly in the managed system’s
BIOS Setup program.
• Restart your system.
• During POST, press <F2> to enter the BIOS Setup program.
• Navigate to
Serial Communication
.
•In the
Serial Connection
menu, ensure that
External Serial
Connector
is set to
Remote Access Device
.
• Save and exit the BIOS Setup program.
• Restart your system.
If IPMI serial is in terminal mode, you can configure the following
additional settings:
• Delete control
• Echo control
• Line edit
• New line sequences
• Input new line sequences
For more information about these properties, see the IPMI 2.0 specification.
For additional information about terminal mode commands, see the Dell
OpenManage Baseboard Management Controller Utilities User’s Guide at
support.dell.com/manuals.
Configuring iDRAC6 Users
See "Adding and Configuring iDRAC6 Users" on page 129 for detailed
information.