Filter
Top Products
Recovering and Troubleshooting the iDRAC6 337
Using the Command Line
Use the getraclog command to view the iDRAC6 log entries.
racadm getraclog [options]
racadm getraclog -i
The getraclog -i command displays the number of entries in the iDRAC6 log.
NOTE: For more information, see getraclog in the
iDRAC6 Administrator Reference
Guide
available on the Dell Support website at support.dell.com/manuals.
You can use the clrraclog command to clear all entries from the
iDRAC log.
racadm clrraclog
Using the Diagnostics Console
The iDRAC6 provides a standard set of network diagnostic tools
(see Table 20-3) that are similar to the tools included with Microsoft
Windows or Linux-based systems. Using the iDRAC6 Web-based interface,
you can access the network debugging tools.
Click Reset iDRAC6 to reset the iDRAC. A normal boot operation is
performed on the iDRAC.
To access the Diagnostics Console page:
1
In the
System
tree, click
Remote Access
Troubleshooting
tab
Diagnostics Console
.
2
Type a command and click
Submit
. Table 20-3 describes the commands
that can be used. The debugging results appear in the
Diagnostics
Console
page.
3
To refresh the
Diagnostics Console
page, click
Refresh
. To execute
another command, click
Go Back to the Diagnostics Page
.