Filter
Top Products
310 Using the iDRAC6 Configuration Utility
Collect System Inventory on Restart
Select Enabled to allow the collection of inventory during boot. See the Dell
Lifecycle Controller User Guide available on the Dell Support Website at
support.dell.com/manuals for more information.
NOTE: Modifying this option restarts the server after you have saved your settings
and exited from the iDRAC6 Configuration Utility.
NOTE: If you choose to restore to factory defaults, the settings for Collect System
Inventory on Restart does not change.
LCD Configuration
Press <Enter> to display the LCD Configuration submenu. When you have
finished configuring the LCD parameters, press <Esc> to return to the
previous menu.
Table 17-2. LCD User Configuration
LCD Line 1 Press <Right Arrow>, <Left Arrow >, and spacebar to switch
between the options.
This feature sets the Home display on the LCD to one of the
following options:
Ambient Temp, Asset Tag, Host Name, iDRAC6 IPv4
Address, iDRAC6 IPv6 Address, iDRAC6 MAC Address,
Model Number, None, Service Tag, System Power,
User-Defined String.
LCD User-Defined
String
If LCD Line 1 is set to User-Defined String, view or enter the
string to be displayed on the LCD.
The string can be maximum of 62 characters long.
LCD System Power
Units
If LCD Line 1 is set to System Power, select Watt or BTU/hr
to specify the Unit to be displayed on the LCD.
LCD Ambient Temp
Units
If LCD Line 1 is set to Ambient Temp, select Celsius or
Fahrenheit to specify the Unit to be displayed on the LCD.