Filter
Top Products
46 Configuring the iDRAC6 Using the Web Interface
Accessing the Web Interface
To access the iDRAC6 Web interface, perform the following steps:
1
Open a supported Web browser window.
To access the Web interface using an IPv4 address, go to step 2.
To access the Web interface using an IPv6 address, go to step 3.
2
Access the Web interface using an IPv4 address; you must have
IPv4 enabled:
In the browser
Address
bar, type:
https://<iDRAC-IPv4-address>
Then, press <Enter>.
3
Access the Web interface using an IPv6 address; you must have IPv6
enabled.
In the browser
Address
bar, type:
https://[<iDRAC-IPv6-address>]
Then, press <Enter>.
4
If the default HTTPS port number, port 443, has been changed, type:
https://<iDRAC-IP-address>:<port-number>
where iDRAC-IP-address is the IP address for the
iDRAC6 and port-number is the HTTPS port number.
5
In the
Address
field, type
https://<
iDRAC-IP-address
>
and press
<Enter>.
If the default HTTPS port number (port 443) has been changed, type:
https://<iDRAC-IP-address>:<port-number>
where
iDRAC-IP-address
is the IP address for the iDRAC6 and
port-number
is the HTTPS port number.
The iDRAC6 Login window is displayed.