Filter
Top Products
Deploying Your Operating System Using VMCLI 247
Specify at least one media type (floppy or CD/DVD drive) with the
command, unless only switch options are provided. Otherwise, an error
message is displayed and the command terminates and generates an error.
Version Display
-v
This parameter is used to display the VMCLI utility version. If no other
non-switch options are provided, the command terminates without an
error message.
Help Display
-h
This parameter displays a summary of the VMCLI utility parameters. If no
other non-switch options are provided, the command terminates without
error.
Encrypted Data
-e
When this parameter is included in the command line, VMCLI will use an
SSL-encrypted channel to transfer data between the management station and
the iDRAC6 in the remote system. If this parameter is not included in the
command line, the data transfer is not encrypted.
NOTE: Using this option does not change the displayed Virtual Media encryption
status to
enabled
in other iDRAC6 configuration interfaces like RACADM or the
Web interface.
VMCLI Operating System Shell Options
The following operating system features can be used in the VMCLI
command line:
• stderr/stdout redirection — Redirects any printed utility output to a file.
For example, using the greater-than character (>) followed by a filename
overwrites the specified file with the printed output of the VMCLI utility.
NOTE: The VMCLI utility does not read from standard input (stdin). As a result,
stdin redirection is not required.