Filter
Top Products
Configuring the iDRAC6 Using the Web Interface 81
racadm config –g cfgRemoteHosts –o
cfgRhostsSyslogServer2 <servername2>; default is
blank
racadm config –g cfgRemoteHosts –o
cfgRhostsSyslogServer3 <servername3>; default is
blank
racadm config –g cfgRemoteHosts –o
cfgRhostsSyslogPort <portnumber>; default is 514
First Boot Device
This feature allows you to select the first boot device for your system and
enable Boot Once. The system boots from the selected device on the next
and subsequent reboots and remains as the first boot device in the BIOS boot
order, until it is changed again either from the iDRAC6 GUI or from the
BIOS Boot sequence.
The first boot device can be selected through the remote Web interface:
1
Open a supported Web browser window.
2
Log in to iDRAC6 Web interface.
3
In the system tree, select
System
Setup
First Boot Device
. The
First
Boot Device
screen is displayed.
Table 4-29 lists the
First Boot Device
settings.
Table 4-29. First Boot Device
Attribute Description
First Boot Device Select the first boot device from the drop-down list. The system
will boot from the selected device on next and subsequent
reboots.
Boot Once Selected = Enabled; Deselected = Disabled. Check this option
to boot from the selected device on the next boot. Thereafter,
the system will boot from the first boot device in the BIOS boot
order.