Filter
Top Products
Using the iDRAC6 Directory Service 169
NOTE: The Bit Mask values are used only when setting Standard Schema
using RACADM.
Single Domain Versus Multiple Domain Scenarios
If all the login users and role groups, and the nested groups, are in the same
domain, then only the domain controllers’ addresses must be configured on
iDRAC6. In this single domain scenario, any group type is supported.
If all the login users and role groups, or any of the nested groups, are from
multiple domains, then Global Catalog server addresses are required to be
configured on iDRAC6. In this multiple domain scenario, all the role groups
and the nested groups, if any, must be a Universal Group type.
Table 7-9. Default Role Group Privileges
Role
Groups
Default Privilege
Level
Permissions Granted Bit Mask
Role
Group 1
Administrator Login to iDRAC, Configure
iDRAC, Configure Users, Clear
Logs, Execute Server Control
Commands, Access Virtual
Console, Access Virtual Media,
Test Alerts, Execute Diagnostic
Commands
0x000001ff
Role
Group 2
Operator Login to iDRAC, Configure
iDRAC, Execute Server Control
Commands, Access Virtual
Console, Access Virtual Media,
Test Alerts, Execute Diagnostic
Commands
0x000000f9
Role
Group 3
Read Only Login to iDRAC 0x00000001
Role
Group 4
None No assigned permissions 0x00000000
Role
Group 5
None No assigned permissions 0x00000000