Filter
Top Products
Configuring Security Features 353
Using the Secure Shell (SSH)
For information about using SSH, see "Using the Secure Shell (SSH)" on
page 91.
Configuring Services
NOTE: To modify these settings, you must have Configure iDRAC permission.
Additionally, the remote RACADM command-line utility can only be enabled if the
user is logged in as root.
1
Expand the
System tree and click Remote Access.
2
Click the
Network/Security
tab and then click
Services
.
3
Configure the following services as required:
• Local Configuration (Table 22-6)
• Web server (Table 22-7)
• SSH (Table 22-8)
• Telnet (Table 22-9)
• Remote RACADM (Table 22-10)
• SNMP agent (Table 22-11)
• Automated System Recovery Agent (Table 22-12)
Use the
Automated Systems Recovery Agent
to enable the
Last Crash
Screen
functionality of the iDRAC6.
NOTE: Server Administrator must be installed with its Auto Recovery feature
activated by setting the Action to either: Reboot System, Power Off System, or
Power Cycle System, for the Last Crash Screen to function in the iDRAC6.
4
Click
Apply Changes
.
Subject Information Certificate attributes entered by the subject
Issuer Information Certificate attributes returned by the issuer
Valid From Issue date of the certificate
Valid To Expiration date of the certificate
Table 22-5. Certificate Information
(continued)
Field Description