Filter
Top Products
Basic Installation of the iDRAC6 41
usb 5-2: device descriptor not accepting
address 2, error -71
These errors are cosmetic in nature and should be ignored. These messages
are caused due to reset of the USB devices during the firmware update
process and are harmless.
Configuring a Supported Web Browser
The following sections provide instructions for configuring the supported
Web browsers.
Configuring Your Web Browser to Connect to the iDRAC6 Web-Based
Interface
If you are connecting to the iDRAC6 Web-based interface from a
management station that connects to the Internet through a proxy server,
you must configure the Web browser to access the Internet from this server.
To configure your Internet Explorer Web browser to access a proxy server:
1
Open a Web browser window.
2
Click
Tools
, and click
Internet Options
.
3
From the
Internet Options
window, click the
Connections
tab.
4
Under
Local Area Network (LAN) settings
, click
LAN Settings
.
5
If the
Use a proxy server
box is selected, select the
Bypass proxy server for
local addresses
box.
6
Click
OK
twice.
List of Trusted Domains
When you access the iDRAC6 Web-based interface through the Web
browser, you are prompted to add the iDRAC6 IP address to the list of trusted
domains if the IP address is missing from the list. When completed, click
Refresh or relaunch the Web browser to reestablish a connection to the
iDRAC6 Web-based interface.