Filter
Top Products
162 Using the iDRAC6 Directory Service
Click the Products tab to add one iDRAC device connected to the network
that is available for the defined users or user groups. Multiple iDRAC devices
can be added to an Association Object.
Adding iDRAC Devices
To add iDRAC devices:
1
Select the
Products
tab and click
Add.
2
Type the iDRAC device name and click
OK
.
3
In the
Properties
window, click
Apply
and click
OK
.
Configuring Microsoft Active Directory With Extended Schema Using
the iDRAC6 Web-Based Interface
1
Open a supported Web browser window.
2
Log in to the iDRAC6 Web-based interface.
3
Go to
Remote Access
Network/Security
tab
Directory Service
tab
Microsoft Active Directory
.
4
Scroll to the bottom of the
Active Directory Configuration and
Management
page, and click
Configure Active Directory
.
The
Active Directory Configuration and Management Step 1 of 4
page is
displayed.
5
Under
Certificate Settings
, select
Enable Certificate Validation
if you
want to validate the SSL certificate of your Active Directory servers;
otherwise, go to step 9.
6
Under
Upload Active Directory CA Certificate
, type the file path of the
certificate or browse to find the certificate file.
NOTE: You must type the absolute file path, which includes the full path and
the complete file name and file extension.
7 C
lick
Upload
.
The certificate information for the Active Directory CA certificate that
you uploaded is displayed.
8
Under
Upload Kerberos Keytab
, type the path of the keytab file or browse
to locate the file. Click
Upload
. The Kerberos keytab is uploaded into
iDRAC6.