Filter
Top Products
Advanced iDRAC6 Configuration 109
Configuring the iDRAC6 Network Settings
CAUTION: Changing your iDRAC6 Network settings may disconnect your current
network connection.
Configure the iDRAC6 network settings using one of the following tools:
• Web-based Interface — See "Configuring the iDRAC6 NIC" on page 49
• RACADM CLI — See cfgLanNetworking in the
iDRAC6 Administrator
Reference Guide
available on the Dell Support website at
support.dell.com/manuals
.
•
iDRAC6 Configuration Utility — See
"Configuring Your System to Use
an iDRAC6" on page 34
NOTE: If you are deploying the iDRAC6 in a Linux environment, see "Installing
RACADM" on page 38.
Accessing the iDRAC6 Through a Network
After you configure the iDRAC6, you can remotely access the managed
system using one of the following interfaces:
• Web-based interface
•RACADM
•Telnet Console
•SSH
•IPMI
Return to Serial Port
Configuration
Return to the Serial Port Configuration page.
Apply Changes Apply the terminal mode settings changes.
Table 5-12. Terminal Mode Settings Page Buttons
(continued)
Button Description