Filter
Top Products
126 Advanced iDRAC6 Configuration
(if certificate issued to IP) of the iDRAC6 (for example, 192.168.0.120) or
the registered DNS iDRAC6 name (if certificate issued to iDRAC
registered name).
To ensure that the CSR matches the registered DNS iDRAC6 name:
1
In the
System
tree, click
Remote Access
.
2
Click the
Network/Security
tab and then click
Network
.
3
In the
Common Settings
table:
a
Select the
Register iDRAC on DNS
check box.
b
In the
DNS iDRAC Name
field, enter the iDRAC6 name.
4
Click
Apply Changes
.
See "Securing iDRAC6 Communications Using SSL and Digital Certificates"
on page 349 for more information about generating CSRs and issuing
certificates.
Why are the remote
RACADM and Web-based services unavailable after a
property change?
It may take a while for the remote RACADM services and the Web-based
interface to become available after the iDRAC6 Web server resets.
The iDRAC6 Web server is reset after the following occurrences:
• When the network configuration or network security properties are
changed using the iDRAC6 Web user interface
•When the
cfgRacTuneHttpsPort
property is changed (including when a
config
-
f <
config file
> changes it)
•When
racresetcfg
is used
• When the iDRAC6 is reset
• When a new SSL server certificate is uploaded
Why doesn’t my DNS server register my iDRAC6?
Some DNS servers only register names of 31 characters or fewer.