Filter
Top Products
86 Configuring the iDRAC6 Using the Web Interface
Table 4-32. SD Card States
SD Card State Description
SD1 and SD2 Boot The controller is powering up.
Active The card receives all SD writes and is used for SD reads.
Standby The card is the secondary card. It is receiving a copy of
the all the SD reads.
Failed An error is reported during a SD card read or write.
Absent The SD card is not detected.
Offline At boot, the Card Indentification (CID) signature of the
card is different from the Non-volatile (NV) storage
value or the card is the destination of a copy operation
that is in-progress.
Write
Protected
The card is write-protected by the physical latch on the
SD card. IDSDM cannot use a write-protected card.
vFlash Active The card receives all SD writes and is used for SD reads.
Absent The SD card is not detected.