Filter
Top Products
246 Deploying Your Operating System Using VMCLI
2
Get the name for the kernel image by typing the following command at
the command line:
uname -r
3
Go to the
/boot
directory and delete the kernel image file, whose name you
determined in Step 2:
mkinitrd /boot/initrd-’uname -r’.img ‘uname -r’
4
Reboot the server.
5
Run the following command to confirm that support for multiple LUNs
has been added for the number of LUNs that you specified in Step 1:
cat /sys/modules/scsi_mod/max_luns
If the device provides a write-protection capability, use this capability to
ensure that Virtual Media will not write to the media.
Omit this parameter from the command line if you are not virtualizing floppy
media. If an invalid value is detected, an error message is displayed and the
command terminates.
CD/DVD Device or Image File
-c {<device-name> | <image-file>}
where <device-name> is a valid CD/DVD drive letter (Windows systems) or
a valid CD/DVD device file name (Linux systems) and <image-file> is the
file name and path of a valid ISO-9660 image file.
This parameter specifies the device or file that will supply the virtual
CD/DVD-ROM media:
For example, an image file is specified as:
-c c:\temp\mydvd.img (Windows systems)
-c /tmp/mydvd.img (Linux systems)
For example, a device is specified as:
-c d:\ (Microsoft Windows systems)
-c /dev/cdrom (Linux systems)
Omit this parameter from the command line if you are not virtualizing
CD/DVD media. If an invalid value is detected, an error message is displayed
and the command terminates.