Filter
Top Products
Configuring the iDRAC6 Using the Web Interface 73
Configuring and Managing Generic LDAP
iDRAC6 provides a generic solution to support Lightweight Directory Access
Protocol (LDAP)-based authentication. This feature does not require any
schema extension on your directory services. For information on configuring
generic LDAP Directory Service, see "Generic LDAP Directory Service" on
page 178.
Configuring iDRAC6 Services
NOTE: To modify these settings, you must have Configure iDRAC permission.
1
Click
Remote Access
Network/Security
. Click the
Services
tab to
display the
Services
configuration page.
2
Configure the following services, as required:
• Local Configuration — see Table 4-20
• Web server — see Table 4-21 for Web server settings
• SSH — see Table 4-22 for SSH settings
• Telnet — see Table 4-23 for Telnet settings.
• Remote RACADM — see Table 4-24 for Remote RACADM settings.
• SNMP Agent — see Table 4-25 for SNMP settings.
Table 4-19. Active Directory Configuration and Management Page Buttons
Button Definition
Print Prints the values that are displayed on the Active Directory
Configuration and Management page.
Refresh Reloads the Active Directory Configuration and Management
page.
Configure Active
Directory
Enables you to configure Active Directory. See "Using the
iDRAC6 Directory Service" on page 143 for detailed configuration
information.
Test Settings Allows you to test the Active Directory configuration using the
settings you specified. See "Using the iDRAC6 Directory Service"
on page 143 for details on using the Test Settings option.