Filter
Top Products
Resource name: See “Resource name” on page 88.
Port: This field shows the port number to which another resource in the loop is
connected. This field is blank if the link is an internal link.
Type: See “Type” on page 89.
Status: The current status of the link as reported by the hardware. Possible values
for the status field are:
Unknown
Cannot determine status. A resource may be non-reporting or unable to
communicate status.
Operational
The link is operating normally.
Failed The link is broken, disconnected, or does not exist. This also may mean
that the resource to which the link is connected may have failed.
Resources associated with loop
When the Resources associated with loop option is selected on loops 256 or 257 from
the Work With High Speed Link (HSL) Resources display, the Logical Hardware
Associated With HSL Loops display appears. Use this display to work with the
High Speed Link (HSL) resources associated with an HSL loop.
See “Using High-Speed Link (HSL) specific options” on page 84 for a description of
the options on this display.
Logical Hardware Associated With HSL Loops
Type options, press Enter.
1=Enable HSL OptiConnect 2=Change Detail 3=Disable HSL OptiConnect
4=Remove 5=Display detail 6=I/O Debug
7=Display System Information 8=Associated packaging resource(s)
9=Resources associated with this resource 12=Display port information
Resource Loop
Opt Description Name Status Number
_ HSL Loop SB01 Operational 256
_ HSL I/O Bridge BC01 Operational
_ HSL I/O Bridge BC02 Operational
_ HSL I/O Bridge BC03 Operational
_ HSL Loop SB02 Operational 257
_ HSL I/O Bridge BC06 Operational
_ HSL I/O Bridge BC07 Operational
_ Remote HSL NIC BC08 Operational
_ HSL I/O Bridge BC09 Operational
_ HSL I/O Bridge BC10 Operational
F3=Exit F5=Refresh F6=Print F8=Include non-reporting resources
F10=Non-reporting resources F11=Display tower information F12=Cancel
Figure 38. Example Logical Hardware Associated With HSL Loops display
Chapter 2. Hardware Service Manager 91