Filter
Top Products
From the Logical Hardware Resources on System Bus display, Display Processor
Information display, Display Main Storage Information display, or the Work with
High Speed Link (HSL) Resources display, you can perform the following:
v Display or change logical hardware resource information
v Display associated packaging hardware resources
v Display logical hardware resource status
Note:
v The System bus resources option also allows you to perform I/O debug
functions and run verification procedures. For more information on this
option, see “Display system bus resources” on page 79.
The High-speed link resources display also allows you to enable and disable HSL
Opticonnect and to display port information.
For more information on collecting information and performing specific functions
using the options and function keys from the Logical Hardware Resources display,
see “Collecting information and performing functions from the Hardware Service
Manager displays” on page 61.
For details on the symbols that appear next to the resource description field, see
“Symbols on the Hardware Service Manager displays” on page 93.
Locate resource by name
The Locate resource by resource name option appears on the Hardware Service
Manager display when the system is in the full or limited paging environment. It
allows you to enter a resource name on the Locate Resource by Resource Name
display:
Logical Hardware Resources
Select one of the following:
1. System bus resources
2. Processor resources
3. Main storage resources
4. High-speed link resources
Selection
F3=Exit F6=Print configuration F12=Cancel
Figure 8. Example Logical Hardware Resources display.
50 Service Functions V5R2