Filter
Top Products
11. From the Select I/O Debug Function display, select the Take/release
ownership option. The following display appears:
Note: If you select option two to release ownership of the resource and
another system currently owns it, the following message appears at the
bottom of the screen:
Select I/O Debug Function
Resource name...........: BC06
Type-Model ............: 1999-999
Serial number...........: 21-1111111
Mode................: Switchable
Select one of the following:
1. Change mode
2. Take/release ownership
Selection
-
F3=Exit F12=Cancel
Figure 71. Example I/O Debug Function display
Confirm Release of Resource Ownership
This system presently has ownership of this resource.
You have requested that the ownership of this resource be released.
Resource details
Resource name: BC06
Type-Model . : 1999-999
Serial number: 21-1111111
Current owning system
Type.....: 9406
Serial number: 10-0033333
Potential owning system
Type.....: 9406
Serial number: 10-1234567
Warning: You should only attempt this action at the direction of your
service representative.
Press Enter to release the ownership of this resource.
F12=Cancel
Figure 72. Example Confirm Release of Resource Ownership display
Chapter 4. Service Reference Procedures 155