Filter
Top Products
v When you perform an MSD, access the Main Storage Dump Manager function
during the dump process. The Main Storage Dump Occurred display appears
when the dump data is placed on the load-source disk. If you press the Enter
key from this display, the Main Storage Dump Manager display appears.
v At any other time, access the Main Storage Dump Manager function from the
Start a Service Tool display.
The Main Storage Dump Manager display allows you to work with the current
dump or copies of past dumps.
Note: Options 4, 5, and 6 may not appear.
Work with current main storage dump
If you select the Work with current main storage dump (MSD) option from the Main
Storage Dump Manager display, you can work with the newest MSD taken by the
system. The current MSD is stored on the load-source disk. It gets replaced by the
next main storage dump or is lost during the next IPL.
The Work with Current Main Storage Dump display allows you to select the
following options:
Main Storage Dump Manager
Select one of the following:
1. Work with current main storage dump (MSD)
2. Work with copies of main storage dumps
3. Work with copy options
4. Activate remote service support communication line
5. Work with system partitions
6. Dump all partitions
Selection
_
F3=Exit F12=Cancel
Chapter 10. Working with Storage Dumps
273