Filter
Top Products
Figure 13 on page 55 shows examples of:
v A battery power unit that is not due for replacement in the system unit
v A battery power unit that is not installed in the system unit
v A battery power unit that is due for replacement in the expansion unit
For more information, press the Help key at the Battery Power Unit Information
display.
Work with service action log
The Work with service action log option appears on the Hardware Service Manager
display when the system is in the full or limited paging environment. When you
select this option, the system displays a log of hardware errors that require action
from a service representative. A service representative uses the log as a starting
point for hardware problem analysis. It provides information on how many times a
system reference code appears for a specific resource and shows description and
location information for the possible failing items.
The Service Action Log prompts you for a specific time range and allows you to
select to view only entries with NEW status. The Service Actions Log Report
display shows the following fields for the log entries that require service action for
the time that you specify:
v Option
v Status
v Date
v Time
v SRC
v Resource
v Isolated
v Count
Service Action Log Report
From..:10/07/93 10:50:45 To..:10/08/93 10:50:45
Select one valid option at a time, Press Enter
2=Display failing item information 8=Close a NEW entry
9=Delete a CLOSED entry
Opt Status Date Time SRC Resource Isolated? Count
_ NEW 07/25/95 10:49:35 B8016055 CTL02 Y 4
_ NEW 07/25/95 10:49:35 B801605A LIN03 Y 4
F3=Exit F12=Cancel
Figure 14. Example Service Action Log Report display
56 Service Functions V5R2