Filter
Top Products
Note: For more information on hardware service manager, see Chapter 2,
“Hardware Service Manager” on page 45.
When you select the System power control network (SPCN) option on the Hardware
Service Manager display, the first System Power Control Network display shows
advisory information. It informs you that there might be a delay before the System
Power Control Network main menu display appears. You must press the Enter key to
continue.
The second System Power Control Network display allows you to choose the
frame or rack-mounted unit with which you want to work.
Pressing F5 (Refresh) causes the system to display updated information for the
SPCN. For example, if the operator had written new VPD information, pressing F5
would display the newly written VPD information.
Note: SPCN on the 9337 disk unit does not support this function.
System Power Control Network
Internal processing is being done to display the
configuration of the system power control network.
Up to five minutes may be required from the
time you press the Enter key at this display.
Press Enter to continue
F3=Exit F12=Cancel
Chapter 9. System Architecture and Configuration
233