Filter
Top Products
C900 2F00
IPL Complete
Operating system initialization is complete when the sign-on screen displays on
the console.
General status SRCs
The following list contains general status SRCs listed in numerical order. The xx
that is used in the SRCs represents a hexadecimal number further defining the
code.
Status Function Performed
D100 8000
Service Processor (SP) is in the process of powering down.
D100 8025
Power down SPCN. This SRC appears during the system shutdown for
Continuously Powered Main Storage (CPM). When the system is in CPM,
the control panel is off, and the display is dark.
D1xx 3xxx
Service Processor portion of MSD in progress
D1xx 30xx
Preparing or writing to disk
D1xx 31xx
System is preparing segment ID 82 data area
D1xx 3200
Preparing or writing from main storage
D1xx 32xx
The last MSD status SRC. xx+1 is the number (in hexadecimal) of 16MB
blocks that are dumped from main storage.
D1xx 8000
Service Processor is in the process of powering down
D1xx 8025
Service Processor is in the process of powering down in CPM mode
D1xx 8030
Service Processor has received a Delayed Power Off request
D1xx 8035
Service Processor Delayed Power Off request has timed out. Main store
dump will follow.
D1xx 8065
Remote Service/Operations Console communications line
deactivated/failed to activate.
D1xx 8066
Remote Service/Operations Console communications line active.
D1xx D505
MFIOP Initialization in progress
D200 xxxx
Secondary Partition Power OFF Phase
214 Service Functions V5R2