Filter
Top Products
Type the desired option number in this field next to the active service tool name
you are displaying or ending.
Work with system devices
Before you select an option on the Work with System Devices display, ensure the
following is true:
v If you have a printer available, ensure that it is connected and configured to the
same I/O processor or storage media unit as the workstation.
v If you have a tape or optical device storage unit available, ensure that it is
installed, connected to the system, and configured correctly.
On the Select Output Printer display, the Select Tape display, or the Select Optical
Device display, the system fills in the following fields:
Resource Name
A name that is assigned by the system to identify a specific device, I/O
processor, or communications device.
Type A number that is assigned by the manufacturer to identify the specifics of
a printer, tape, or optical device unit.
Model The model number of the printer, tape, or optical device unit.
Serial A number that is assigned by the manufacturer to identify a specific
printer, tape, or optical device unit.
If no printer is available for this workstation I/O processor, you must select a
different output device (such as a tape unit) for the service tool to use.
If the device you selected is already being used by a job, do one the following:
v Press the Enter key to cancel the job and use the device for the service tool.
v Press F12 (Cancel) to cancel this device selection and then select a different
device.
Selecting Console Type:
This option allows you to choose from the following console types:
Note: These changes will only take affect after performing an unattended IPL.
v 0 = Manufacturing set console to twinax
v 1 = twinax * manually set.
v 2 = Ops-console (Direct).
v 3 = Ops-console (LAN).
Work with service tools user IDs
Service tools user IDs control access to DST functions, System Service Tools
(STRSST command), and Licensed Internal Code service functions. When a Service
tools user ID is changed, the old ID is replaced with the new one.
Note: When you type the new password, it is not displayed.
Table 3. Service tools user IDs
Privilege Description QSECOFR QSRV ″22222222″
(full)
″11111111″
(basic)
default
Logical partitioning operator x x x
Chapter 1. Dedicated Service Tools (DST) 25