Filter
Top Products
There are resources with unresolved locations. Press F13 to see list.
Select the Unresolved locations function key to view the Hardware with Unresolved
Locations display.
To update or change the location information, select the Change detail option on the
Hardware with Unresolved Locations display.
Note: If you take no action, the following applies:
v The resource does not appear on the packaging resource displays or print-outs.
On some resource displays you can press the Unresolved locations function key to
view the unresolved locations information.
v The system operates normally. The information that is requested for these
resources is for display purposes only.
From logical displays:
The Unresolved locations function key is available only on the Packaging Hardware
Resources displays. To access unresolved location information from the logical
displays, you must select the Associated packaging resource(s) option (see “Display
associated resources” on page 67).
Print
From packaging and logical displays:
The Print function key produces a printout of the information displayed. You can
select this option from various displays.
Select the Print (F6) function key from the Hardware Service Manager display to
print the system configuration list. The system configuration list includes system
information and the packaging and logical information. For more information on
printing the system configuration list, see “Printing the System Configuration List”
on page 93.
Refresh the display
From packaging and logical displays:
Select the Refresh function key to access the data again. Use the Refresh function
key when a change was made from this display. For example, select this function
key if power is restored to a non-reporting resource.
Remove non-reporting resource information
From packaging and logical displays:
The Remove option is available on both the packaging and logical hardware
resources displays.
This option allows you to remove non-reporting resources (hardware that has not
reported to the system) and user-created frame information. Non-reporting
resources are identified with a question mark (?) next to the description field (see
“Symbols on the Hardware Service Manager displays” on page 93). For more
information on non-reporting resources, see “Display non-reporting resources” on
page 71
Chapter 2. Hardware Service Manager 83