Filter
Top Products
SCSI Registers 4-37
abytestoredinsystemmemory,thebytemustfirstbe
moved to an intermediate LSI53C875A register (such as
a SCRATCH register), and then to the SFBR.
This register also contains the state of the lower eight bits
of the SCSI data bus during the Selection phase if the
COM bit in the DMA Control (DCNTL) register is clear.
If the COM bit is cleared, do not access this register
using SCRIPTS operations, as nondeterminate
operations may occur. This includes SCRIPTS
Read/Write operations and conditional transfer control
instructions that initialize the SFBR register.
Register: 0x09
SCSI Output Control Latch (SOCL)
Read/Write
REQ Assert SCSI REQ/ Signal 7
ACK Assert SCSI ACK/ Signal 6
BSY Assert SCSI BSY/ Signal 5
SEL Assert SCSI SEL/ Signal 4
ATN Assert SCSI ATN/ Signal 3
MSG Assert SCSI MSG/ Signal 2
C_D Assert SCSI C_D/ Signal 1
I/O Assert SCSI I_O/ Signal 0
This register is used primarily for diagnostic testing or programmed I/O
operation. It is controlled by the SCRIPTS processor when executing
SCSI SCRIPTS. SOCL is used only when transferring data using
programmed I/O. Some bits are set (1) or cleared (0) when executing
SCSI SCRIPTS. Do not write to the register once the LSI53C875A starts
executing normal SCSI SCRIPTS.
76543210
REQ ACK BSY SEL ATN MSG C_D I/O
00000000