Filter
Top Products
Phase Mismatch Jump Registers 4-105
Registers:0xC8–0xCB
Remaining Byte Count (RBC)
Read/Write
RBC Remaining Byte Count (RBC) [31:0]
This register contains the byte count that remains for the
BMOV that was executing when the phase mismatch
occurred. In the case of direct or indirect BMOV
instructions, the upper byte of this register will also
contain the opcode of the BMOV that was executing. In
the case of a table indirect BMOV instruction, the upper
byte will contain the upper byte of the table indirect entry
that was fetched.
In the case of a SCSI data receive, this byte count will
reflect all data received from the SCSI bus, including any
byte in SCSI Wide Residue (SWIDE). There will be no
data remaining in the part that must be flushed to
memorywiththeexceptionofapossiblebyteinthe
SWIDE register. That byte must be flushed to memory
manually in SCRIPTS.
In the case of a SCSI data send, this byte count will
reflect all data sent out onto the SCSI bus. Any data left
in the part from the phase mismatch will be ignored and
automatically cleared from the FIFOs.
Registers:0xCC–0xCF
Updated Address (UA)
Read/Write
UA Updated Address [31:0]
This register will contain the updated data address for the
BMOV that was executing when the phase mismatch
occurred.
31 0
RBC
00000000000000000000000000000000
31 0
UA
00000000000000000000000000000000