Filter
Top Products
6-10 Electrical Specifications
Table 6.1 3 and Figure 6.7 provide Reset Input timing data.
Figure 6.7 Reset Input
Table 6.1 4 and Figure 6.8 provide Interrupt Output timing data.
Table 6.13 Reset Input
Symbol Parameter Min Max Unit
t
1
Reset pulse width 10 – t
CLK
t
2
Reset deasserted setup to CLK HIGH 0 – ns
t
3
MAD setup time to CLK HIGH
(for configuring the MAD bus only)
20 – ns
t
4
MAD hold time from CLK HIGH
(for configuring the MAD bus only)
20 – ns
t
2
Note:
1. When enabled.
CLK
RST/
MAD
1
Valid Data
t
3
t
4
t
1
Table 6.14 Interrupt Output
Symbol Parameter Min Max Unit
t
1
CLK HIGH to IRQ/ LOW 2 11 ns
t
2
CLK HIGH to IRQ/ HIGH 2 11 ns
t
3
IRQ/ deassertion time 3 – CLK