Filter
Top Products
11 - 4 Opening Greeting
Issue 3 EliteMail VMS/EliteMail Limited
Change the Prompts Used for Quick Play
You can edit the QP= command in the AVPRMPT file to change which
prompts are used in Quick Play, or use one of these 3 AVPRMPT files
shipped with the system:
AVPRMPT.ENV
Includes the prompts used most often by most systems. Includes
prompts for date and time stamps, sending and retrieving messages,
reviewing old messages, and many prompts used for setup options.
This is the AVPRMPT file used by most systems.
AVPRMPT.2M
Includes all of the prompts in AVPRMPT.ENV, plus several more
commonly-used prompts, to create approximately a 2MB QP.IDX file.
AVPRMPT.ALL
Includes all of the prompts on the system, including those installed
with any feature packages. You must have enough storage space on
the hard disk to use all the system prompts in Quick Play.
These 3 files have the Quick Play commands for each prompt set already
defined. All you have to do to use one of these files is copy it to the system
AVPRMPT file location (
e.g.
, C:\VMAIL\PROMPT\US\AVPRMPT.US).
Use AVPRMPT file Shipped with the System
1. At the Banner Screen, press then press to exit the system.
Enter a System Manager ID, and press .
2. Change to the subdirectory containing system prompts (
e.g.
, enter
CD PROMPT\US, and press ).
3. Use the DOS COPY command to copy one of the AVPRMPT files
shipped with the system to the AVPRMPT file used by your system.
(
e.g.
, enter COPY AVPRMPT.2M AVPRMPT.US, and press
).
4. Press - - to restart the system.
Exiting to DOS disconnects all calls in progress.