Filter
Top Products
2 - 8 Install the Remote Computer Software
Issue 3 EliteMail VMS/EliteMail Limited
8. Add an additional Phone Book entry for each host computer
you plan to call. To do this, repeat step 4 through step 7.
9. When you finish, press repeatedly to exit.
S
ECTION
4
S
ET
THE
H
OST
M
ODEM
The serial interface on the EliteMail VMS/EliteMail Limited ETU has a 9-
pin RS-232 connector for direct connection to the Remote Maintenance
computer, and an RJ-11 serial port for remote connection by modem. The
interface designation is COM2. Switch SW1, located on the interface, is a
4-position DIP switch that controls the active connection according to
Table 1-1 SW1 Settings.
Table 1-1 SW1 Settings
SAMPLE PHONE NUMBER FORMAT:
9,9721234567,,,,987
EXAMPLE MEANING
9
The number used to dial out. For NEC telephone systems, this
is
9
.
,
Inserts a two-second delay.
9721234567
The number dialed. In this example,
972
is the area code,
1234567
the phone number.
,,,,987
Adds a delay before dialing an extension. Four or five commas
add an 8- to 10-second pause prior to dialing
987
.
Figure 2-6 Sample Phone Number Format
1
Normally off.
2
Normally off. When 1 and 2 are both on, the VM
application stops working (Maintenance Mode)
3
On – COM2 Remote (RJ11) Connection
Off – COM1 Local Connection
4
Maintenance Use