Filter
Top Products
EliteMail VMS/EliteMail Limited Issue 3
Reference 18 - 27
Transfer Day? Nite?
Use these fields to turn call transfer on or off for Day Mode and Night
Mode. Refer to Chapter 2 Section 2 Call Transfer on page 2-11 and
Section 3 Screen Calls on page 2-16.
Call Transfer Type
This unlabeled field, below the
Nite? field, sets call transfer. Refer to
Chapter 2 Section 2 Call Transfer on page 2-11 and Section 3
Screen Calls on page 2-16 and Chapter 9 Section 12 Take a
Message on page 9-45.
Rings
The number of times the extension should ring if the call transfer is
Await Answer or Wait for Ringback.
Intro
The system plays any recording in the
Intro
field before it transfers a
call. The system does not play the
Intro
if call transfer is turned off.
Holding?
This field is Yes if call holding is used. Refer to Chapter 2 Section 1
Call Hold on page 2-1.
Transfer Options
Controls how the system transfers calls routed through the
transaction box. Refer to Chapter 2 Section 2 Call Transfer on page
2-11 and Section 3 Screen Calls on page 2-16.
Greeting Day/Nite/Alternate
Controls 3 separate transaction box greetings. The fields display
how many seconds each greeting lasts.
Active
Tells you which greeting is currently active.
D/N
means the standard
Day or Night greeting is active (depending on current mode).
Alt
means the alternate greeting is currently active.
Action Day/Nite
Tells the system what to do if the caller does not press any
touchtones during the greeting.
Max-msg
Applies if the
Action
field is
Take-msg
. Sets time (maximum 9999
seconds or 2 hours, 46 minutes) an outside caller message can last.