Filter
Top Products
20 - 4 Subscribers
Issue 3 EliteMail VMS/EliteMail Limited
Hold/Archive msgs
This dual field defines how long the system saves the subscriber old
and archived messages. The hold time or the archive time can be set
to up to 99 days. However, to conserve disk space, you should set it
for 7 days or less.
Access
Uses one-letter codes to turn on or turn off specific system features.
You can specify combinations of the access codes listed and
described in Appendix A Access Codes.
New Msgs / Total
The number of new messages waiting, and the time (in hours and
minutes) the messages last. Total messages includes new messages
and old messages.
Transfer?
Controls call transfer to the subscriber extension. If call transfer is on,
the field also specifies the telephone number or extension where
calls are transferred.
Call Transfer Type
This unlabeled field, below the Transfer? field, sets the way calls are
transferred and can be: Await-Ans (Await Answer), Release, or
Wait-Ring (Wait for Ringback). For details, refer to Chapter 2 Section
2 Call Transfer on page 2-11 and Section 3 Screen Calls on page 2-
16.
Rings
The number of extension rings before a caller is transferred to the
subscriber voice mailbox for Await Answer or Wait for Ringback.
Screening?
Controls Screening Options. If yes, the subscriber Screening
Options are active. The subscriber must have Await Answer call
transfer to use the system transfer and screening options.
Holding?
Controls call holding and allows you to queue up several callers that
are waiting when the subscriber extension is busy. The values
allowed in this field are: Yes (To let outside callers press 1 to hold),
Vox (To let outside callers say Yes to hold), or No (To turn holding
off). You can use call holding only with Await Answer or Wait for
Ringback call transfer. For details, refer to Chapter 2 Section 1 Call
Hold on page 2-1.