Filter
Top Products
2 - 2 Install the Remote Computer Software
Issue 3 EliteMail VMS/EliteMail Limited
6. When the system asks:
Do you want to use a direct serial connection? (Y/N),
enter Y, and press if using direct connection, and go to the
next step. Enter N, and press if using remote connection, and
go to step 9.
7. When system asks:
Do you know which COM port to use? (Y/N),
enter Y, and press . Copying remote maintenance files is
displayed.
8. When system asks:
Should direct connect use COM1? (Y/N),
enter Y, and press . Go to step 13.
9. When the system asks:
Has a modem been installed on this PC? (Y/N),
enter
Y,
and press . If you have not installed a modem, enter
N,
and press to cancel.
10. When the system asks:
Do you know the modem COM port?,
enter Y, and press
.
11. When the system asks:
Is your modem assigned to COM1? (Y/N),
enter
N,
and press .
12. When the system asks:
Is your modem assigned to COM2? (Y/N),
enter
Y,
and press .
13. After you identify the modem COM port, the program copies Remote
Maintenance on the computer hard disk and also creates a batch file
(RR.BAT) in the root directory of the hard disk.
14. After Remote Maintenance is installed, remove and store the remote
maintenance disk, and set up software.