Filter
Top Products
GS700TR Smart Switch Software Administration Manual
3-30 Configuring Switching Information
v1.0, May, 2008
Figure 3-21
Note: If no MST instances have been configured on the switch, the page displays a
“No MSTs Available” message and does not display the fields shown in
Table 3-20 on page 3-30.
Figure 3-22
Table 3-20. Spanning Tree MST Port Status Fields
Field Description
Select MST Select an existing MST instance from the pulldown list of MST IDs in
the Status table at the top of the screen.
Interface Select a physical or port channel interface to configure. The port is
associated with the VLAN(s) associated with the selected MST
instance.
Port Priority The priority for a particular port within the selected MST instance. The
port priority is set in multiples of 16. If you specify a value that is not a
multiple of 16, the priority is set to the priority is automatically set to the
next lowest priority that is a multiple of 16. For example, if you set a
value between 0 and 15, the priority is set to 0. If you specify a number
between 16 and 31, the priority is set to 16.