NETGEAR GS700TR Switch User Manual


 
GS700TR Smart Switch Software Administration Manual
6-30 Managing Device Security
v1.0, May, 2008
2. Click Refresh to update the information on the screen.
Traffic Control
From the Traffic Control page, you can configure MAC Filters, Storm Control, Port Security, and
Protected Port settings. To display the page, click the Security > Traffic Control tab.
The Traffic Control folder contains links to the following features:
MAC Filter:
“MAC Filter Configuration” on page 6-30
“MAC Filter Summary” on page 6-32
“Storm Control” on page 6-33
Port Security:
“Port Security Configuration” on page 6-34
“Port Security Interface Configuration” on page 6-35
“Security MAC Address” on page 6-37
“Protected Ports Membership” on page 6-38
MAC Filter Configuration
Use the MAC Filter Configuration page to create MAC filters that limit the traffic allowed into and
out of specified ports on the system.
To display the MAC Filter Configuration page:
Reauthentication Enabled Displays if reauthentication is enabled on the selected port. This is a
configurable field. The possible values are 'true' and 'false'. If the value
is 'true' reauthentication will occur. Otherwise, reauthentication will not
be allowed.
Port Status This field shows the authorization status of the specified port. The
possible values are 'Authorized', 'Unauthorized' and 'N/A'. If the port is
in detached state, the value will be 'N/A' since the port cannot
participate in port access control.
Table 6-19. Port Summary Fields (continued)
Field Description