Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-30 Configuring System Information
v1.0, May, 2008
2. If you make any changes to the page, click Apply to apply the new settings to the system.
Figure 2-18
Table 2-19. LLDP Interface Configuration Fields
Field Description
Interface Specifies the port to be affected by these parameters.
Transmit Enables or disables the transmission of LLDP protocol data units
(PDUs). The default is disabled.
Receive Enables or disables the ability of the port to receive LLDP PDUs. The
default is disabled.
Notify When notifications are enabled, LLDP interacts with the Trap Manager
to notify subscribers of remote data change statistics. The default is
disabled.
Transmit Management
Information
Select the check box to enable the transmission of management
address instance. Clear the check box to disable management
information transmission. The default is disabled.
Optional TLV(s) Select each check box next to the type-length value (TLV) information to
transmit. Choices include System Name, System Description,
System Capabilities, and Port Description. To configure the System
Name, see
“System Information” on page 2-1. To configure the Port
Description, see “Configuring and Viewing Device Port Information” on
page 3-1.