Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-40 Configuring System Information
v1.0, May, 2008
Network Policy Information Specifies if network policy TLV is present in the LLDP frames:
• Media Application Type: Specifies the application type. Types of
application types are unknown, voicesignaling, guestvoice,
guestvoicesignalling, softphonevoice, videoconferencing,
streamingvideo, vidoesignalling. Each application type that is received
has the VLAN id, priority, DSCP, tagged bit status and unknown bit
status. A port may receive one or many such application types. If a
network policy TLV has been transmitted only then would this
information be displayed.
• VLAN ID: Specifies the VLAN id associated with a particular policy
type.
• Priority: Specifies the priority associated with a particular policy type.
• DSCP: Specifies the DSCP associated with a particular policy type.
• Unknown Bit Status: Specifies the unknown bit associated with a
particular policy type.
• Tagged Bit Status: Specifies the tagged bit associated with a particular
policy type.
Inventory Specifies the inventory TLV present in LLDP frames:
• Hardware Revisions
• Firmware Revisions
• Software Revisions
• Serial Number
• Manufacturer Name
• Model Name
• Asset ID
Location Information Specifies if location TLV is present in LLDP frames:
• Sub Type: Specifies type of location information.
• Location Information: Specifies the location information as a string for
given type of location ID.
Extended PoE Specifies if local device is a PoE device.
Extended PoE PSE Specifies if extended PSE TLV is present in LLDP frame:
• Available: Specifies available power sourcing equipment's power value
in tenths of watts on the port of local device.
• Source: Specifies power source of this port.
• Priority: Specifies PSE port power priority.
Extended PoE PD Specifies if extended PD TLV is present in LLDP frame.
• Required: Specifies required power device power value in tenths of
watts on the port of local device.
• Source: Specifies power source of this port.
• Priority: Specifies PD port power priority.
Table 2-26. LLPD-MED Local Device Information Fields (continued)
Field Description