Filter
Top Products
GS700TR Smart Switch Software Administration Manual
2-24 Configuring System Information
v1.0, May, 2008
Trap Configuration
This page displays an entry for every active Trap Receiver. To access this page, click System >
SNMP > SNMP V1/V2 > Trap Configuration in the navigation tree.
Table 2-13. Command Buttons
Field Description
Add Add the currently selected receiver configuration to the switch.
Delete Delete the currently selected receiver configuration.
Cancel Cancel the configuration on the screen. Reset the data on the screen to the
latest value of the switch.
Apply Sends the updated configuration to the switch. Configuration changes take
effect immediately.
Figure 2-14