Configuring LAT Characteristics 6-11
NODE LIMIT Characteristic
NODE LIMIT Characteristic
Introduction
The NODE LIMIT characteristic specifies the maximum number of LAT service
nodes that the access server maintains in its node database. The range is from 1 to 2000,
and the default is 200.
You can also specify a node limit of NONE. This keyword indicates that the only limit
is the available memory of the access server.
Changing the Access Server NODE LIMIT
Use the DEFINE/SET/CHANGE SERVER NODE LIMIT command to change this
characteristic. The following example shows how to change the node limit to 300:
Local> CHANGE SERVER NODE LIMIT 300