Filter
Top Products
Configuring a List of Internet Gateway Addresses
7-16 TCP/IP Network Characteristics
Configuring a List of Internet Gateway Addresses
Introduction
If the access server users need to access hosts in different networks or subnets, you can
define a database of Internet gateways. The access server uses gateways to route traffic
to different networks and subnets.
Displaying a List of Gateway Addresses
To display a list of Internet gateway addresses, use the SHOW/LIST/MONITOR
INTERNET GATEWAY command.
Internet Gateway Addresses Display Example
The following example shows how to display a list of Internet gateway addresses
available to the access server for routing network traffic:
Local> SHOW INTERNET GATEWAY
Gateway: 16.20.0.3 Host: 16.30.22.35
Gateway: 16.20.48.56 Network: 16.30.0.0 Mask: 255.255.0.0
Gateway: 16.20.98.245 Network: Any
Gateway: 16.20.48.48 Network: 17.0.0.0 Mask: 255.0.0.0
Configuring a Default Gateway
The access server uses a default gateway to route a packet when its destination address:
• Is on a different subnet than the access server
• Does not match any of the known gateway network addresses
Default Gateway Definition Example
The following example shows how to define a default gateway:
Local> CHANGE INTERNET GATEWAY 195.1.1.72